FPS part 2 XD

[DOMOisURdaddy]

well yeah, i finaly got my bucking working, and its shooting 380, so yeah i want it to shoot 400+

things i have

120 spring
metal bushings
steal gears
src ultra high torque motor
madbull ultimate hop up
madbull tbb

so yeah i was thinking since im shooting around 370-380

if i drop in a 130 spring would that get it up to 400?

[C0MR@D3_4]

my advice is just to stay where you are. Just because there is 400 limit doesn't mean you have to get it to 400. Also you say your shooting 370-380? I would say thats good enough/ In my experience, boosting the gun up from 370 to 400 makes very little difference. one of my aks hits 365, the other, 395-400, the have the same type of barrel and hop up, and honestly, there isn't much difference in performance.....

I think you should just stay where you are and don't risk it.. 

[Curtiskiernan]

i think the 130 spring will put you over 400. If you want to get closer to 400 without spending money seal the air system. This IS the most important part before upping the spring rate IMO. Any blow by on any part of your air system will be a loss in FPS.

[DOMOisURdaddy]

the air is sealed good, checked it and made sure i guess i just want more fps for the distance, i mean i can always change the spring from 120 to 130 but i mostly play at the winery. and if i was to play at a big game i can always downgrade.

but then again i was using mixed bbs XD so i guess i can just chrono it to check the fps again

[FAST_3]

You might want to try changing the tappet plate and nozzle, those could be reasons that your gun is shooting less with that madbull hopup.

[DOMOisURdaddy]

would those 2 do much? i think the nozzle should be good i think, i tried the compression thing and it seemed to hold a good amount of air.

[Curtiskiernan]

if the air nozzle doesn't fit right into the hop-up chamber then you will lose some air from between the air system and the hop-up chamber. as for tappet plate im not sure as to why you would need to change that. But then again i dont know everything...please share FAST_3?!

[FAST_3]

The nozzle and tappet plate can make a huge difference...as long as it is the part that is bad. I have changed nozzles on a tons of guns and some have gained more than 50 fps from it, im not saying that your gun specificaly will gain that but it is worth a try. The tappet plate has more to do with the feeding but if it is worn out then you may lose some fps because the nozzle is getting pushed into the hopup too far. They are just suggestions, but if your losing that much fps then i would assume that the hopup is to blame...

[DOMOisURdaddy]

yeah, which bucking would u suggest? because the bucking that comes with it is just to fat making it to hard to put it in.

in the youtube video it just slips in, but not with this 1, using lube and grease. and non of that made a difference. so i guess i would have to get another bucking, but i have to see which bucking isnt as fat as the blue 60 degree bucking.

i tried using my stock bucking, which all that does is just jam the bbs.

[FAST_3]

I wouldnt know...ive never used any other bucking inmine before.  You can try a king arms or echo-1...